# re: MAC brew install PHP5.3 2016-06-11 23:36 聂文龙

bash-3.2# brew install php53-apcu php53-gearman php53-geoip php53-gmagick php53-imagick php53-intl php53-mcrypt php53-memcache php53-memcached php53-mongo php53-opcache php53-phalcon php53-redis php53-sphinx php53-swoole php53-uuid php53-xdebug;

==> Installing php53-apcu from homebrew/php

==> Downloading https://homebrew.bintray.com/bottles-php/php53-apcu-4.0.8.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring php53-apcu-4.0.8.el_capitan.bottle.tar.gz

==> Caveats

To finish installing apcu for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-apcu.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the apcu module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the apcu module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-apcu/4.0.8: 6 files, 94.5K

==> Installing php53-gearman from homebrew/php

==> Installing dependencies for homebrew/php/php53-gearman: boost, gearman

==> Installing homebrew/php/php53-gearman dependency: boost

==> Downloading https://homebrew.bintray.com/bottles/boost-1.60.0_2.el_capitan.bottle.1.tar.gz

######################################################################## 100.0%

==> Pouring boost-1.60.0_2.el_capitan.bottle.1.tar.gz

🍺 /usr/local/Cellar/boost/1.60.0_2: 11,139 files, 434.0M

==> Installing homebrew/php/php53-gearman dependency: gearman

==> Downloading https://homebrew.bintray.com/bottles/gearman-1.1.12.el_capitan.bottle.2.tar.gz

######################################################################## 100.0%

==> Pouring gearman-1.1.12.el_capitan.bottle.2.tar.gz

==> Caveats

To have launchd start gearman now and restart at login:

brew services start gearman

Or, if you don't want/need a background service you can just run:

gearmand -d

==> Summary

🍺 /usr/local/Cellar/gearman/1.1.12: 210 files, 1.7M

==> Installing homebrew/php/php53-gearman

==> Downloading https://homebrew.bintray.com/bottles-php/php53-gearman-1.1.2.el_capitan.bottle.1.tar.gz

######################################################################## 100.0%

==> Pouring php53-gearman-1.1.2.el_capitan.bottle.1.tar.gz

==> Caveats

To finish installing gearman for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-gearman.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the gearman module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the gearman module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-gearman/1.1.2: 5 files, 117.5K

==> Installing php53-geoip from homebrew/php

==> Installing dependencies for homebrew/php/php53-geoip: geoip

==> Installing homebrew/php/php53-geoip dependency: geoip

==> Downloading https://homebrew.bintray.com/bottles/geoip-1.6.9.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring geoip-1.6.9.el_capitan.bottle.tar.gz

🍺 /usr/local/Cellar/geoip/1.6.9: 17 files, 553.2K

==> Installing homebrew/php/php53-geoip

==> Downloading https://homebrew.bintray.com/bottles-php/php53-geoip-1.1.0.el_capitan.bottle.1.tar.gz

######################################################################## 100.0%

==> Pouring php53-geoip-1.1.0.el_capitan.bottle.1.tar.gz

==> Caveats

To finish installing geoip for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-geoip.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the geoip module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the geoip module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-geoip/1.1.0: 5 files, 29.6K

==> Installing php53-gmagick from homebrew/php

==> Installing dependencies for homebrew/php/php53-gmagick: libtool, libtiff, graphicsmagick

==> Installing homebrew/php/php53-gmagick dependency: libtool

==> Downloading https://homebrew.bintray.com/bottles/libtool-2.4.6.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring libtool-2.4.6.el_capitan.bottle.tar.gz

==> Caveats

In order to prevent conflicts with Apple's own libtool we have prepended a "g"

so, you have instead: glibtool and glibtoolize.

==> Summary

🍺 /usr/local/Cellar/libtool/2.4.6: 70 files, 3.7M

==> Installing homebrew/php/php53-gmagick dependency: libtiff

==> Downloading https://homebrew.bintray.com/bottles/libtiff-4.0.6_1.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring libtiff-4.0.6_1.el_capitan.bottle.tar.gz

🍺 /usr/local/Cellar/libtiff/4.0.6_1: 261 files, 3.4M

==> Installing homebrew/php/php53-gmagick dependency: graphicsmagick

==> Downloading https://homebrew.bintray.com/bottles/graphicsmagick-1.3.24.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring graphicsmagick-1.3.24.el_capitan.bottle.tar.gz

🍺 /usr/local/Cellar/graphicsmagick/1.3.24: 475 files, 11.9M

==> Installing homebrew/php/php53-gmagick

==> Downloading https://homebrew.bintray.com/bottles-php/php53-gmagick-1.1.7RC2.el_capitan.bottle.1.tar.gz

######################################################################## 100.0%

==> Pouring php53-gmagick-1.1.7RC2.el_capitan.bottle.1.tar.gz

==> Caveats

To finish installing gmagick for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-gmagick.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the gmagick module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the gmagick module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-gmagick/1.1.7RC2: 4 files, 167.2K

==> Installing php53-imagick from homebrew/php

==> Installing dependencies for homebrew/php/php53-imagick: xz, imagemagick

==> Installing homebrew/php/php53-imagick dependency: xz

==> Downloading https://homebrew.bintray.com/bottles/xz-5.2.2.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring xz-5.2.2.el_capitan.bottle.tar.gz

🍺 /usr/local/Cellar/xz/5.2.2: 91 files, 1.4M

==> Installing homebrew/php/php53-imagick dependency: imagemagick

==> Downloading https://homebrew.bintray.com/bottles/imagemagick-6.9.4-7.el_capitan.bottle.1.tar.gz

######################################################################## 100.0%

==> Pouring imagemagick-6.9.4-7.el_capitan.bottle.1.tar.gz

🍺 /usr/local/Cellar/imagemagick/6.9.4-7: 1,460 files, 17.9M

==> Installing homebrew/php/php53-imagick

==> Downloading https://homebrew.bintray.com/bottles-php/php53-imagick-3.3.0_2.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring php53-imagick-3.3.0_2.el_capitan.bottle.tar.gz

==> Caveats

To finish installing imagick for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-imagick.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the imagick module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the imagick module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-imagick/3.3.0_2: 2 files, 326.9K

==> Installing php53-intl from homebrew/php

==> Downloading https://homebrew.bintray.com/bottles-php/php53-intl-5.3.29_1.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring php53-intl-5.3.29_1.el_capitan.bottle.tar.gz

==> Caveats

To finish installing intl for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-intl.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the intl module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the intl module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-intl/5.3.29_1: 5 files, 517.5K

==> Installing php53-mcrypt from homebrew/php

==> Installing dependencies for homebrew/php/php53-mcrypt: mhash, mcrypt

==> Installing homebrew/php/php53-mcrypt dependency: mhash

==> Downloading https://homebrew.bintray.com/bottles/mhash-0.9.9.9.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring mhash-0.9.9.9.el_capitan.bottle.tar.gz

🍺 /usr/local/Cellar/mhash/0.9.9.9: 19 files, 452.8K

==> Installing homebrew/php/php53-mcrypt dependency: mcrypt

==> Downloading https://homebrew.bintray.com/bottles/mcrypt-2.6.8.el_capitan.bottle.1.tar.gz

######################################################################## 100.0%

==> Pouring mcrypt-2.6.8.el_capitan.bottle.1.tar.gz

🍺 /usr/local/Cellar/mcrypt/2.6.8: 18 files, 396.3K

==> Installing homebrew/php/php53-mcrypt

==> Downloading https://homebrew.bintray.com/bottles-php/php53-mcrypt-5.3.29.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring php53-mcrypt-5.3.29.el_capitan.bottle.tar.gz

==> Caveats

To finish installing mcrypt for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-mcrypt.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the mcrypt module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the mcrypt module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-mcrypt/5.3.29: 3 files, 44.8K

==> Installing php53-memcache from homebrew/php

==> Downloading https://homebrew.bintray.com/bottles-php/php53-memcache-2.2.7.el_capitan.bottle.1.tar.gz

######################################################################## 100.0%

==> Pouring php53-memcache-2.2.7.el_capitan.bottle.1.tar.gz

==> Caveats

To finish installing memcache for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-memcache.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the memcache module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the memcache module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-memcache/2.2.7: 3 files, 54.1K

==> Installing php53-memcached from homebrew/php

==> Installing dependencies for homebrew/php/php53-memcached: php53-igbinary, memcached, libmemcached

==> Installing homebrew/php/php53-memcached dependency: php53-igbinary

==> Downloading https://homebrew.bintray.com/bottles-php/php53-igbinary-1.2.1.el_capitan.bottle.1.tar.gz

######################################################################## 100.0%

==> Pouring php53-igbinary-1.2.1.el_capitan.bottle.1.tar.gz

==> Caveats

To finish installing igbinary for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-igbinary.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the igbinary module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the igbinary module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-igbinary/1.2.1: 6 files, 50.7K

==> Installing homebrew/php/php53-memcached dependency: memcached

==> Downloading https://homebrew.bintray.com/bottles/memcached-1.4.24.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring memcached-1.4.24.el_capitan.bottle.tar.gz

==> Caveats

To have launchd start memcached now and restart at login:

brew services start memcached

Or, if you don't want/need a background service you can just run:

/usr/local/opt/memcached/bin/memcached

==> Summary

🍺 /usr/local/Cellar/memcached/1.4.24: 10 files, 162.0K

==> Installing homebrew/php/php53-memcached dependency: libmemcached

==> Downloading https://homebrew.bintray.com/bottles/libmemcached-1.0.18_1.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring libmemcached-1.0.18_1.el_capitan.bottle.tar.gz

🍺 /usr/local/Cellar/libmemcached/1.0.18_1: 230 files, 1.8M

==> Installing homebrew/php/php53-memcached

==> Downloading https://homebrew.bintray.com/bottles-php/php53-memcached-2.2.0.el_capitan.bottle.1.tar.gz

######################################################################## 100.0%

==> Pouring php53-memcached-2.2.0.el_capitan.bottle.1.tar.gz

==> Caveats

To finish installing memcached for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-memcached.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the memcached module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the memcached module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-memcached/2.2.0: 5 files, 105.6K

==> Installing php53-mongo from homebrew/php

==> Downloading https://homebrew.bintray.com/bottles-php/php53-mongo-1.6.14.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring php53-mongo-1.6.14.el_capitan.bottle.tar.gz

==> Caveats

To finish installing mongo for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-mongo.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the mongo module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the mongo module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-mongo/1.6.14: 2 files, 346.5K

==> Installing php53-opcache from homebrew/php

==> Downloading https://homebrew.bintray.com/bottles-php/php53-opcache-7.0.5.el_capitan.bottle.1.tar.gz

######################################################################## 100.0%

==> Pouring php53-opcache-7.0.5.el_capitan.bottle.1.tar.gz

==> Caveats

To finish installing opcache for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-opcache.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the opcache module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the opcache module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-opcache/7.0.5: 4 files, 121.8K

==> Installing php53-phalcon from homebrew/php

==> Downloading https://homebrew.bintray.com/bottles-php/php53-phalcon-2.0.9.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring php53-phalcon-2.0.9.el_capitan.bottle.tar.gz

==> Caveats

To finish installing phalcon for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-phalcon.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the phalcon module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the phalcon module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-phalcon/2.0.9: 2 files, 3.4M

==> Installing php53-redis from homebrew/php

==> Installing dependencies for homebrew/php/php53-redis: igbinary

==> Installing homebrew/php/php53-redis dependency: igbinary

==> Downloading https://homebrew.bintray.com/bottles-php/igbinary-1.2.1.el_capitan.bottle.1.tar.gz

######################################################################## 100.0%

==> Pouring igbinary-1.2.1.el_capitan.bottle.1.tar.gz

🍺 /usr/local/Cellar/igbinary/1.2.1: 9 files, 19.6K

==> Installing homebrew/php/php53-redis

==> Downloading https://github.com/phpredis/phpredis/archive/2.2.7.tar.gz

==> Downloading from https://codeload.github.com/phpredis/phpredis/tar.gz/2.2.7

######################################################################## 100.0%

==> /usr/local/opt/php53/bin/phpize

==> ./configure --prefix=/usr/local/Cellar/php53-redis/2.2.7_1 --with-php-config=/usr/local/opt/php53/bin/php-config --enable-redis-igbinary

==> make

==> Caveats

To finish installing redis for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-redis.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the redis module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the redis module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-redis/2.2.7_1: 4 files, 319.6K, built in 23 seconds

==> Installing php53-sphinx from homebrew/php

==> Installing dependencies for homebrew/php/php53-sphinx: libsphinxclient

==> Installing homebrew/php/php53-sphinx dependency: libsphinxclient

==> Downloading https://homebrew.bintray.com/bottles-php/libsphinxclient-2.2.10.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring libsphinxclient-2.2.10.el_capitan.bottle.tar.gz

🍺 /usr/local/Cellar/libsphinxclient/2.2.10: 4 files, 65.7K

==> Installing homebrew/php/php53-sphinx

==> Downloading https://pecl.php.net/get/sphinx-1.3.2.tgz

######################################################################## 100.0%

==> /usr/local/opt/php53/bin/phpize

==> ./configure --prefix=/usr/local/Cellar/php53-sphinx/1.3.2 --with-php-config=/usr/local/opt/php53/bin/php-config

==> make

==> Caveats

To finish installing sphinx for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-sphinx.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the sphinx module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the sphinx module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-sphinx/1.3.2: 2 files, 76.8K, built in 13 seconds

==> Installing php53-swoole from homebrew/php

==> Downloading https://homebrew.bintray.com/bottles-php/php53-swoole-1.8.1.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring php53-swoole-1.8.1.el_capitan.bottle.tar.gz

==> Caveats

To finish installing swoole for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-swoole.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the swoole module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the swoole module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-swoole/1.8.1: 2 files, 349.2K

==> Installing php53-uuid from homebrew/php

==> Downloading https://homebrew.bintray.com/bottles-php/php53-uuid-1.0.3.el_capitan.bottle.tar.gz

######################################################################## 100.0%

==> Pouring php53-uuid-1.0.3.el_capitan.bottle.tar.gz

==> Caveats

To finish installing uuid for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-uuid.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the uuid module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the uuid module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-uuid/1.0.3: 2 files, 15.2K

==> Installing php53-xdebug from homebrew/php

==> Downloading http://xdebug.org/files/xdebug-2.2.7.tgz

==> Downloading from https://xdebug.org/files/xdebug-2.2.7.tgz

######################################################################## 100.0%

==> /usr/local/opt/php53/bin/phpize

==> ./configure --prefix=/usr/local/Cellar/php53-xdebug/2.2.7 --with-php-config=/usr/local/opt/php53/bin/php-config --enable-xdebug

==> make

==> Caveats

To finish installing xdebug for PHP 5.3:

* /usr/local/etc/php/5.3/conf.d/ext-xdebug.ini was created,

do not forget to remove it upon extension removal.

* Validate installation via one of the following methods:

*

* Using PHP from a webserver:

* - Restart your webserver.

* - Write a PHP page that calls "phpinfo();"

* - Load it in a browser and look for the info on the xdebug module.

* - If you see it, you have been successful!

*

* Using PHP from the command line:

* - Run `php -i "(command-line 'phpinfo()')"`

* - Look for the info on the xdebug module.

* - If you see it, you have been successful!

==> Summary

🍺 /usr/local/Cellar/php53-xdebug/2.2.7: 2 files, 167.0K, built in 29 seconds

bash-3.2#

回复  更多评论