本文共 1280 字，大约阅读时间需要 4 分钟。

1： ti官方网址：

2：LE CODE 设置函数

3：设置phy 历程代码学堂：

4：

2:设置LE Code广播需要注意的点

1：Note the following:

1：The eventProps parameter does not contain the legacy advertising flag, GAP_ADV_PROP_LEGACY:

2：Also, advertising on LE 2M PHY can be either connectable or scannable. In this case it is only connectable (GAP_ADV_PROP_CONNECTABLE).

3：The primary PHY (primPhy) is the LE 1M PHY. This is the PHY on which we will transmit the ADV_EXT_IND packets that contain the pointer to the AUX_ADV_IND packet.

5：The primary PHY parameter will decide whether the device is advertising in legacy mode, or in long range mode (with ADV_EXT_IND). The secondary PHY parameter will decide the PHY of any auxiliary advertisement packets (i.e. all packets beginning with AUX_).

If advertising non-connectable and non-scannable, an ADV_EXT_IND PDU with no Adv Data can be sent without an auxiliary packet. In all other cases, the ADV_EXT_IND PDU mist contain a pointer to an auxiliary advertisement packet, AUX_ADV_IND. The AUX_ADV_IND PDU is sent on the PHY given in secPhy, and on one of the secondary channels (also known as data channels).

将primPhy设置成1M和LE CODE，才可以将广播转换成ADV_EXT_IND ，然后还可以配置

可以加入QQ群：687360507

转载地址：https://blog.csdn.net/zhi_Alanwu/article/details/107810998 如侵犯您的版权，请留言回复原文章的地址，我们会给您删除此文章，给您带来不便请您谅解！