短信收发类无错版JustinIO.cs
发布日期:2021-06-30 19:06:51
浏览次数:2
分类:技术文章
本文共 8249 字,大约阅读时间需要 27 分钟。
using System;
using System.Runtime.InteropServices;namespace JustinIO {
class CommPort {public string PortNum;
public int BaudRate; public byte ByteSize; public byte Parity; // 0-4=no,odd,even,mark,space public byte StopBits; // 0,1,2 = 1, 1.5, 2 public int ReadTimeout; //comm port win32 file handle private int hComm = -1; public bool Opened = false; //win32 api constants private const uint GENERIC_READ = 0x80000000; private const uint GENERIC_WRITE = 0x40000000; private const int OPEN_EXISTING = 3; private const int INVALID_HANDLE_VALUE = -1; [StructLayout(LayoutKind.Sequential)] public struct DCB { //taken from c struct in platform sdk public int DCBlength; // sizeof(DCB) public int BaudRate; // 指定当前波特率 current baud rate // these are the c struct bit fields, bit twiddle flag to set public int fBinary; // 指定是否允许二进制模式,在windows95中必须主TRUE binary mode, no EOF check public int fParity; // 指定是否允许奇偶校验 enable parity checking public int fOutxCtsFlow; // 指定CTS是否用于检测发送控制,当为TRUE是CTS为OFF,发送将被挂起。 CTS output flow control public int fOutxDsrFlow; // 指定CTS是否用于检测发送控制 DSR output flow control public int fDtrControl; // DTR_CONTROL_DISABLE值将DTR置为OFF, DTR_CONTROL_ENABLE值将DTR置为ON, DTR_CONTROL_HANDSHAKE允许DTR"握手" DTR flow control type public int fDsrSensitivity; // 当该值为TRUE时DSR为OFF时接收的字节被忽略 DSR sensitivity public int fTXContinueOnXoff; // 指定当接收缓冲区已满,并且驱动程序已经发送出XoffChar字符时发送是否停止。TRUE时,在接收缓冲区接收到缓冲区已满的字节XoffLim且驱动程序已经发送出XoffChar字符中止接收字节之后,发送继续进行。 FALSE时,在接收缓冲区接收到代表缓冲区已空的字节XonChar且驱动程序已经发送出恢复发送的XonChar之后,发送继续进行。XOFF continues Tx public int fOutX; // TRUE时,接收到XoffChar之后便停止发送接收到XonChar之后将重新开始 XON/XOFF out flow control public int fInX; // TRUE时,接收缓冲区接收到代表缓冲区满的XoffLim之后,XoffChar发送出去接收缓冲区接收到代表缓冲区空的XonLim之后,XonChar发送出去 XON/XOFF in flow control public int fErrorChar; // 该值为TRUE且fParity为TRUE时,用ErrorChar 成员指定的字符代替奇偶校验错误的接收字符 enable error replacement public int fNull; // eTRUE时,接收时去掉空(0值)字节 enable null stripping public int fRtsControl; // RTS flow control /*RTS_CONTROL_DISABLE时,RTS置为OFF RTS_CONTROL_ENABLE时, RTS置为ON RTS_CONTROL_HANDSHAKE时, 当接收缓冲区小于半满时RTS为ON 当接收缓冲区超过四分之三满时RTS为OFF RTS_CONTROL_TOGGLE时, 当接收缓冲区仍有剩余字节时RTS为ON ,否则缺省为OFF*/public int fAbortOnError; // TRUE时,有错误发生时中止读和写操作 abort on error
public int fDummy2; // 未使用 reserved public uint flags; public ushort wReserved; // 未使用,必须为0 not currently used public ushort XonLim; // 指定在XON字符发送这前接收缓冲区中可允许的最小字节数 transmit XON threshold public ushort XoffLim; // 指定在XOFF字符发送这前接收缓冲区中可允许的最小字节数 transmit XOFF threshold public byte ByteSize; // 指定端口当前使用的数据位 number of bits/byte, 4-8 public byte Parity; // 指定端口当前使用的奇偶校验方法,可能为:EVENPARITY,MARKPARITY,NOPARITY,ODDPARITY 0-4=no,odd,even,mark,space public byte StopBits; // 指定端口当前使用的停止位数,可能为:ONESTOPBIT,ONE5STOPBITS,TWOSTOPBITS 0,1,2 = 1, 1.5, 2 public char XonChar; // 指定用于发送和接收字符XON的值 Tx and Rx XON character public char XoffChar; // 指定用于发送和接收字符XOFF值 Tx and Rx XOFF character public char ErrorChar; // 本字符用来代替接收到的奇偶校验发生错误时的值 error replacement character public char EofChar; // 当没有使用二进制模式时,本字符可用来指示数据的结束 end of input character public char EvtChar; // 当接收到此字符时,会产生一个事件 received event character public ushort wReserved1; // 未使用 reserved; do not use }[StructLayout(LayoutKind.Sequential)]
private struct COMMTIMEOUTS { public int ReadIntervalTimeout; public int ReadTotalTimeoutMultiplier; public int ReadTotalTimeoutConstant; public int WriteTotalTimeoutMultiplier; public int WriteTotalTimeoutConstant; }[StructLayout(LayoutKind.Sequential)]
private struct OVERLAPPED { public int Internal; public int InternalHigh; public int Offset; public int OffsetHigh; public int hEvent; } [DllImport("kernel32.dll")] private static extern int CreateFile( string lpFileName, // 要打开的串口名称 uint dwDesiredAccess, // 指定串口的访问方式,一般设置为可读可写方式 int dwShareMode, // 指定串口的共享模式,串口不能共享,所以设置为0 int lpSecurityAttributes, // 设置串口的安全属性,WIN9X下不支持,应设为NULL int dwCreationDisposition, // 对于串口通信,创建方式只能为OPEN_EXISTING int dwFlagsAndAttributes, // 指定串口属性与标志,设置为FILE_FLAG_OVERLAPPED(重叠I/O操作),指定串口以异步方式通信 int hTemplateFile // 对于串口通信必须设置为NULL ); [DllImport("kernel32.dll")] private static extern bool GetCommState( int hFile, //通信设备句柄 ref DCB lpDCB // 设备控制块DCB ); [DllImport("kernel32.dll")] private static extern bool BuildCommDCB( string lpDef, // 设备控制字符串 ref DCB lpDCB // 设备控制块 ); [DllImport("kernel32.dll")] private static extern bool SetCommState( int hFile, // 通信设备句柄 ref DCB lpDCB // 设备控制块 ); [DllImport("kernel32.dll")] private static extern bool GetCommTimeouts( int hFile, // 通信设备句柄 handle to comm device ref COMMTIMEOUTS lpCommTimeouts // 超时时间 time-out values ); [DllImport("kernel32.dll")] private static extern bool SetCommTimeouts( int hFile, // 通信设备句柄 handle to comm device ref COMMTIMEOUTS lpCommTimeouts // 超时时间 time-out values ); [DllImport("kernel32.dll")] private static extern bool ReadFile( int hFile, // 通信设备句柄 handle to file byte[] lpBuffer, // 数据缓冲区 data buffer int nNumberOfBytesToRead, // 多少字节等待读取 number of bytes to read ref int lpNumberOfBytesRead, // 读取多少字节 number of bytes read ref OVERLAPPED lpOverlapped // 溢出缓冲区 overlapped buffer ); [DllImport("kernel32.dll")] private static extern bool WriteFile( int hFile, // 通信设备句柄 handle to file byte[] lpBuffer, // 数据缓冲区 data buffer int nNumberOfBytesToWrite, // 多少字节等待写入 number of bytes to write ref int lpNumberOfBytesWritten, // 已经写入多少字节 number of bytes written ref OVERLAPPED lpOverlapped // 溢出缓冲区 overlapped buffer ); [DllImport("kernel32.dll")] private static extern bool CloseHandle( int hObject // handle to object ); [DllImport("kernel32.dll")] private static extern uint GetLastError(); public void Open() { DCB dcbCommPort = new DCB(); COMMTIMEOUTS ctoCommPort = new COMMTIMEOUTS(); // 打开串口 OPEN THE COMM PORT. hComm = CreateFile(PortNum ,GENERIC_READ | GENERIC_WRITE,0, 0,OPEN_EXISTING,0,0); // 如果串口没有打开,就打开 IF THE PORT CANNOT BE OPENED, BAIL OUT. if(hComm == INVALID_HANDLE_VALUE) { throw(new ApplicationException("非法操作,不能打开串口!")); } // 设置通信超时时间 SET THE COMM TIMEOUTS. GetCommTimeouts(hComm,ref ctoCommPort); ctoCommPort.ReadTotalTimeoutConstant = ReadTimeout; ctoCommPort.ReadTotalTimeoutMultiplier = 0; ctoCommPort.WriteTotalTimeoutMultiplier = 0; ctoCommPort.WriteTotalTimeoutConstant = 0; SetCommTimeouts(hComm,ref ctoCommPort); // 设置串口 SET BAUD RATE, PARITY, WORD SIZE, AND STOP BITS. GetCommState(hComm, ref dcbCommPort); dcbCommPort.BaudRate=BaudRate; dcbCommPort.flags=0; //dcb.fBinary=1; dcbCommPort.flags|=1; if (Parity>0) { //dcb.fParity=1 dcbCommPort.flags|=2; } dcbCommPort.Parity=Parity; dcbCommPort.ByteSize=ByteSize; dcbCommPort.StopBits=StopBits; //if (!BuildCommDCB("9600,n,8,1 ", ref dcbCommPort)) //{ // throw (new ApplicationException("非法操作,不能打开串口! ")); //}if (!SetCommState(hComm, ref dcbCommPort))
{ //uint ErrorNum=GetLastError(); throw(new ApplicationException("非法操作,不能打开串口!")); } //unremark to see if setting took correctly //DCB dcbCommPort2 = new DCB(); //GetCommState(hComm, ref dcbCommPort2); Opened = true; } public void Close() { if (hComm!=INVALID_HANDLE_VALUE) { CloseHandle(hComm); } } public byte[] Read(int NumBytes) { byte[] BufBytes; byte[] OutBytes; BufBytes = new byte[NumBytes]; if (hComm!=INVALID_HANDLE_VALUE) { OVERLAPPED ovlCommPort = new OVERLAPPED(); int BytesRead=0; ReadFile(hComm,BufBytes,NumBytes,ref BytesRead,ref ovlCommPort); OutBytes = new byte[BytesRead]; Array.Copy(BufBytes,OutBytes,BytesRead); } else { throw(new ApplicationException("串口未打开!")); } return OutBytes; } public void Write(byte[] WriteBytes) { if (hComm!=INVALID_HANDLE_VALUE) { OVERLAPPED ovlCommPort = new OVERLAPPED(); int BytesWritten = 0; WriteFile(hComm,WriteBytes,WriteBytes.Length,ref BytesWritten,ref ovlCommPort); } else { throw(new ApplicationException("串口未打开!")); } } }class HexCon {
// 把十六进制字符串转换成字节型和把字节型转换成十六进制字符串 converter hex string to byte and byte to hex string public static string ByteToString(byte[] InBytes) { string StringOut=""; foreach (byte InByte in InBytes) { StringOut=StringOut + String.Format("{0:X2} ",InByte); } return StringOut; } public static byte[] StringToByte(string InString) { string[] ByteStrings; ByteStrings = InString.Split(" ".ToCharArray()); byte[] ByteOut; ByteOut = new byte[ByteStrings.Length-1]; for (int i = 0;i==ByteStrings.Length-1;i++) { ByteOut[i] = Convert.ToByte(("0x" + ByteStrings[i])); } return ByteOut; } }}转载地址:https://linuxstyle.blog.csdn.net/article/details/1536628 如侵犯您的版权,请留言回复原文章的地址,我们会给您删除此文章,给您带来不便请您谅解!
发表评论
最新留言
初次前来,多多关照!
[***.217.46.12]2024年04月09日 15时36分02秒
关于作者
喝酒易醉,品茶养心,人生如梦,品茶悟道,何以解忧?唯有杜康!
-- 愿君每日到此一游!
推荐文章
【工具与环境】Excel中批量插入行
2019-04-30
【个人实验注意事项】
2019-04-30
【学习笔记】对vanilla的一些个人理解
2019-04-30
【解决错误】The size of tensor a (8) must match the size of tensor b (64) at non-singleton dimension 1
2019-04-30
word文档中实现目录索引中标题加粗,前导符和页码不加粗
2019-04-30
“学硕” VS “专硕”
2019-04-30
【NLP学习笔记】知识图谱阅读笔记及其心得
2019-04-30
【工具使用】新版CSDN-markdown编辑器使用指南
2019-04-30
《知识图谱》阅读笔记(六)
2019-04-30
【NLP学习笔记】中文分词(Word Segmentation,WS)
2019-04-30
【NLP学习笔记】词性标注(Part-of-speech Tagging, POS)
2019-04-30
《知识图谱》阅读笔记(七)
2019-04-30
《知识图谱》阅读笔记(九)
2019-04-30
【超越白皮书7】你需要知道关于ETH2.0的几个事实
2019-04-30
超越白皮书8:穿云而过的闪电网络
2019-04-30
AMM做市无常损失对冲分析系列(一)—— 损益及期权对冲模型构建
2019-04-30